3.1 Marine surveyors may require proof of compliance for any
appliances and equipment fitted after the effective date for each
standard.
3.2 Proof of compliance should be kept on board and be available for
inspection by a marine surveyor and/or radio inspector.
3.3 Inspection may include the operation of the appliance or
equipment to ensure that it is in proper working order.
3.4 Safety inspection certificates may be withheld if the required
appliance or equipment does not comply with the requirements of these
standards or the electrical installation requirements identified in the
Ship Safety Electrical Standards, TP 127.
3.5 Where the size or special purpose of a ship makes it unreasonable
or impossible to comply with the measures to ensure electromagnetic
compatibility and with minimum safe siting distances between various
types of appliances and equipment, the marine surveyor shall, after
consultation with the owner or his representative, determine the most
practical and serviceable siting for the appliance or equipment which
best meets the provisions of these standards.